The Roots 1216 RAS rotary lobe blower is a splash-lubricated, positive-displacement (PD) WHISPAIR® design for industrial air service.
Nameplate shows model UNT-1216-RAS-J-V-Y-SL-68-B-R-OGE and S/N LR20001436 (see photos).
Customer noted 12×14 size; Roots “1216” also denotes the 12×16 frame family—confirm connection callout if required.

Key Specifications

• Manufacturer: Howden Roots
• Series / Type: RAS WHISPAIR® rotary lobe blower, splash-lubricated
• Model Designation: UNT-1216-RAS-J-V-Y-SL-68-B-R-OGE
• Frame / Size: 1216 (12×14; 1216 frame family)
• Lubrication: Splash oil both ends (sight glasses installed)
• Condition: Unused storeroom spare; no process history

Included

• Roots 1216 RAS WHISPAIR blower, bare shaft, as photographed
• Factory oilers/sight glasses and shipping skid
• No motor, coupling, or base unless pictured

Documentation (click to open)

Roots RAS / RAS-J — Installation, Operation & Maintenance (10–20″, Splash-Lubricated) PDF
ROOTS® Parts & Service (OEM support)

See more options in our Blowers category.

The post Roots 1216 RAS WHISPAIR Rotary Lobe Blower 12×14 appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.

The Goulds 3196 MTX 3×4-13 centrifugal pump is an ANSI B73.1 process pump in 316 stainless steel with an 11.0″ impeller. This unit presents as a new/rebuilt storeroom spare with no reported process service. The 3196 MTX frame is a plant standard for reliability and easy maintenance. The nameplate indicates approximately 400 GPM at 136 ft at 1800 RPM, making it a strong fit for chemical, pharmaceutical, and water treatment duties where corrosion resistance and interchangeability matter.

Key Specifications

• Model: 3196 MTX
• Size: 3×4-13
• Material: 316 Stainless Steel (tag)
• Impeller Diameter: 11.0 in (tag)
• Rated Point (tag): ~400 GPM @ 136 ft, 1800 RPM
• Serial No. (tag): 1754E712
• Condition: New/Rebuilt storeroom spare; smooth shaft rotation
• Seal/Bearing: Mechanical seal installed; MTX bearing frame (see photos)

Included

• Goulds 3196 MTX 3×4-13 pump assembly as photographed
• Installed mechanical seal and guard as shown
• No base, coupling, or motor unless pictured

Documentation (click to open)

Goulds 3196 — Installation/Operation/Maintenance (PDF)
Goulds 3196 — Brochure / Curves (PDF)

Browse more pumps in our Pumps category.
OEM site: ITT Goulds Pumps.

Shipping & Terms

• • Palletized and protected for LTL; export crating available.
  • Freight quotes on request—send ZIP and dock/liftgate details.
  • 30-day warranty against DOA; buyer verifies duty point and metallurgy with OEM data.

The post Goulds 3196 MTX 3×4-13 centrifugal pump | 316SS Rebuilt Spare appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.

DeZURIK KGC cast stainless steel knife gate valve sized 18″ with
ANSI Class 150 cold working pressure rating. Tag shows Body: 316,
Gate: 316, Liner: NONE, Seat: M (metal),
and Max Temp: 400°F. A DeZURIK pneumatic cylinder actuator provides automatic on/off service.
Ideal for pulp & paper, chemical, mining, wastewater and general process isolation where stainless construction and tight shutoff are required.

Key Specifications

• Manufacturer: DeZURIK
• Series / Model: KGC cast knife gate valve
• Size: 18″
• Pressure Class: Class 150 CWP
• Materials (tag): Body 316 SS; Gate 316 SS; Liner NONE; Seat M (metal)
• Max Temperature: 400°F
• Actuation: DeZURIK pneumatic cylinder (G-Series type)
• Part Number: 9733886R001
• Serial Number (tag): C2318547
• Condition: Unused storeroom spare; no process history

Included

• 18″ KGC Class 150 valve in 316SS with factory pneumatic cylinder actuator
• Crated on pallet as photographed (no additional accessories unless shown)

Documentation (click to open)

DeZURIK KGC — Installation/Operation/Maintenance, 2–24″ (IOM, PDF)
DeZURIK Pneumatic Cylinder Operator for G-Series Actuators (PDF)

Browse more valves in our Valves category.
OEM site: DeZURIK.

Shipping & Terms

• Ships LTL on the pallet shown; export crating available.
• Freight quotes—send ZIP and dock/liftgate info.
• 30-day warranty against DOA; buyer verifies dimensional/pressure fit with OEM data.

The post DeZURIK 18″ KGC CL150 Knife Gate Valve, 316SS, Pneumatic appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.

DeZURIK BHP high-performance butterfly valve in 30-inch size and ANSI Class 150 rating.
Cast markings show CF8M (316 stainless). This series is designed for tight shutoff and throttling
in demanding services across process industries. Photos show the heavy flanged body pattern and keyed shaft for actuator mounting.

Key Specifications

• Manufacturer: DeZURIK
• Series/Style: BHP — High Performance Butterfly Valve
• Size: 30″ (DN 750)
• Pressure Class: ANSI 150 (CL-150)
• Body/Disc Material: CF8M (316 stainless steel) — per cast marks
• End Connection: Flanged body pattern
• Part Number: 2055684R001
• Condition: Unused storeroom spare; no process service

Included

• DeZURIK 30″ BHP CL-150 butterfly valve, CF8M, bare shaft as photographed
• No actuator/gearbox unless shown in photos
• Palletized for safe freight

Documentation (click to open)

DeZURIK BHP — Installation & Operation Manual (PDF)
DeZURIK BHP — Product Bulletin 45.00-1 (PDF)

See more options in our Valves category.
OEM page: DeZURIK — BHP High Performance Butterfly Valves.

Shipping & Terms

• Ships LTL on the pallet pictured; export crating available.
• Freight quotes on request—send ZIP and dock/liftgate info.
• 30-day warranty against DOA; buyer confirms end connection, seat/trim, and application compatibility with OEM data.

The post DeZURIK 30″ BHP Class 150 Butterfly Valve CF8M appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.

Durco Mark 3 STD ANSI chemical process pump sized 2K3x1.5-10ARV with a
10.00″ reverse-vane impeller. Nameplate indicates DCI (ductile cast iron) and
250 PSI @ 100°F. Assembly turns freely and presents as a storeroom spare following rebuild.
A rugged choice for transfer and process service where the reverse-vane design is preferred.

Key Specifications

• Brand / Series: Flowserve Durco — Mark 3 STD (ANSI B73.1)
• Size: 2K3x1.5-10ARV  |  Impeller: 10.00″
• Design: Reverse-vane impeller (ARV), end-suction, frame-mounted
• Material: DCI — Ductile Cast Iron
• Rating: 250 PSI @ 100°F
• Serial No. (tag): 10161896CHP001A
• Condition: Rebuilt storeroom spare; no process run time reported

Included

• Durco MK3 STD pump assembly as photographed
• Bearing housing and seal hardware as shown
• No base, coupling, or motor unless pictured

Documentation (click to open)

Durco Mark 3 — Installation / Operation / Maintenance (PDF)
Durco Mark 3 — Product Brochure / Overview (PDF)

Browse more pumps in our Pumps category.
OEM site: Flowserve — Durco Mark 3.

Shipping & Terms

• Palletized for LTL; export crating available.
• Freight quotes on request—send ZIP and dock/liftgate details.
• 30-day warranty against DOA; buyer confirms compatibility and duty point with OEM curves.

The post Flowserve/Durco 2K3x1.5-10ARV MK3 ANSI Pump appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.

Close-coupled horizontal centrifugal motorpump assembly suitable for general industrial service,
transfer, seal water, cooling loops, and filtration skids. Pump tag shows SMP2000;
motor is a Baldor Reliance Super-E CEM3610T, 3 HP, 182TC, TEFC, 3450 RPM.

Key Specifications

• Pump: Flowserve SMP2000
• Size: 1.25 × 1.5 × 5 (suction × discharge × impeller)
• Configuration: Horizontal, close-coupled motor pump
• Motor: Baldor Reliance Super-E, Cat# CEM3610T
• Horsepower: 3 HP  |  Speed: 3450 RPM (60 Hz)
• Voltage/Amps: 230/460 VAC, 7.2/3.6 A (usable at 208 V 7.9 A)
• Frame/Enclosure: 182TC, TEFC  |  SF: 1.15
• Condition: Unused storeroom spare; no process history.

Included

• Flowserve SMP2000 pump end mounted to Baldor Reliance CEM3610T 3 HP motor
• Printed instruction booklet (as shown in photos)
• Protective plugs/caps where pictured

Documentation (click to open)

Flowserve Library — SMP Series resources (PDFs)
Baldor Reliance CEM3610T Product Catalog Packet (PDF)

See more options in our Pumps category.
OEM sites: Flowserve •
Baldor Reliance.

Shipping & Terms

• Professionally packed; shaft/motor protected. Ships parcel or LTL based on destination.
• Freight quotes available—send ZIP, dock/liftgate details.
• 30-day warranty against DOA; buyer confirms fit and compatibility with OEM data.

The post Flowserve SMP2000 Pump 1.25×1.5×5 w/ Baldor 3 HP Motor appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.

Warren 14-DLB-20H Horizontal Split Case Pump — 316 Stainless, Double-Suction

OEM Warren DLB horizontal split case, double-suction centrifugal pump, model
14-DLB-20H. Stainless construction (316SS per listing) with heavy-duty bearing housings.
Item was removed in working condition due to facility closure; cleaned and inspected, ready for re-installation.

Key Specifications

• Manufacturer / Series: Warren Pumps — DLB Split Case
• Model: 14-DLB-20H
• Design: Horizontal split case, double-suction impeller
• Casing Material: 316 Stainless Steel (wetted)
• Hydraulics (nameplate class): ~8000 GPM, ~175 ft TDH, ~1175 RPM
• Impeller: [VERIFY] nameplate shows approx. 22.5 in trim (see photos)
• Suction/Discharge: Large-bore flanged nozzles (see photos for bolt pattern & bore)
• Rotation / Coupling: Per system selection; furnished bare shaft ends

Included, Condition & Removal Notes

• Pump assembly as shown (upper casing removed in photos for internal inspection)
• No driver, base, guards, or instrumentation unless pictured
• Used / Good: removed from service operational; stored indoors; smooth shaft journals noted

Documentation (Click to View PDFs)

• 
  Warren DLB/DTB Split Case — Installation • Operation • Maintenance (OEM PDF)
  
• 
  Warren Pumps — Technical Resources (Index)
  
• 
  Sulzer — OEM Spare Parts for Warren DLB/DTB (PDF)
  

Explore more Pumps from DWP Industrial Sales.

Shipping, Returns & Support

Ships palletized/crated and insured. Export prep available on request. Returns accepted within 30 days per DWP policy.

The post Warren 14-DLB-20H Split Case Pump, 316SS, 8000 GPM appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.

Allis Chalmers 8100 Series Horizontal Split Case Pump — 8×6-12 13.40″ Impeller (New/Rebuilt Storeroom Spare)

OEM Allis Chalmers / A-C Series 8100 double-suction, horizontal split case pump.
Unit is a new/rebuilt storeroom spare with inspection tags; clean paint and hardware as shown.
Nameplate tag indicates size 8×6-12 and impeller trim 13.40″.

Key Specifications

The post Allis Chalmers 8100 Split Case Pump 8×6-12, 13.40″ Imp appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.

OEM Goulds 3175 process pump casing in 14×14-22 size, cast and machined from
316 stainless steel (316 SS). Used in good condition with clean machined faces and no major wear.
Ideal direct replacement for 3175-series pumps in chemical, pulp & paper, and industrial liquid services.

Key Specifications

• Manufacturer: Goulds (ITT Goulds Pumps)
• Model / Series: 3175 Centrifugal Process Pump
• Component: Casing / Volute Housing Only
• Size: 14×14-22 (flanged ends)
• Material: 316 Stainless Steel (316 SS)
• Design: End-suction, back-pull-out configuration (per 3175 series)
• Part Number: 259-5-1203 s
• Compatibility: Fits Goulds 3175 pumps of matching size group

Documentation (Click to View PDFs)

• 
  Goulds 3175 Product Brochure / Technical Information (PDF)
  
• 
  Goulds 3175 Installation • Operation • Maintenance (PDF)
  

Browse more

MRO Parts
.

Condition & Shipping

Used / Good condition with clean machined faces and no cracks or repairs observed.
Ships palletized and insured; export crate available on request.
Returns accepted within 30 days per DWP Industrial Sales policy.

The post Goulds 3175 Pump Casing 14×14-22, 316SS appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.

Endress Hauser Proline Prowirl F 200 4″ CL150 Vortex Flowmeter

The Endress Hauser Proline Prowirl F 200 4″ vortex flowmeter is a precision-engineered device for process and utility flow applications.
Designed for accuracy and reliability, this model features a robust 316L stainless steel body and advanced vortex measurement technology,
making it ideal for demanding industrial environments.

Overview

The Proline F 200 series combines the trusted Endress Hauser Proline transmitter platform with a high-performance vortex sensor.
It supports PROFIBUS PA output, offers durable CL150 flanged stainless ends, and is factory-calibrated for consistent readings.

Documentation (Click to View PDFs)

• Prowirl F 200 Technical Information – TI01084DEN (PDF)
• Operating Instructions – BA01154DEN (PDF)
• Factory Calibration Certificate (PDF)
• v

Condition & Availability

This flowmeter is in excellent condition and includes all original calibration documentation.
It has been professionally inspected and verified for functionality. Ships securely packed and insured.
View our MRO Parts catalog for more industrial process instruments.

The post Endress Hauser Proline Prowirl F 200 4″ CL150 Vortex Flowmeter appeared first on DWP Industrial Sales | Pumps, Valves & MRO Equipment.